Solving your TVR cooling problems:

Here is a picture of the 27x19in aluminum racing radiator I installed...with NO modifications to the chassis. I can

still run a mini-spare if I want.

To accomplish this you need:

1) Griffin aluminum radiator from Speedway Motors, Lincoln, NE. Part #: 917345-27.5, $179

2) Turbo swirl fan from Speedway, part #: 910159-15 ($65)

3) About 4 feet for aluminum U-shape channel, approx. 2x1in (can't remember the exact size, but it fits on the top and

bottom of the rad.

4) 90in of 3/8 threaded rod and a few nuts/washers

5) a few inches of 1/2in angle aluminum

It;s tougn to see on the photo, but I use the channel to sort of clamp the radiator...I then attach brackets to the channels. The bottom of the rad is attached via some simple brackets bent at 45 degrees to bolt to the bottom of the U channel, and to the original mount points for the old radiator.

This clamping arrangment is used because there is no way to actually attach the rad....there are no mount points on it. It does have a 1/4 in of channel on the top and bottom that you could weld too, but I don'e have a tig welder so I did this.